Help Center

How do I refill my Glass Refillable Floss Container?

Here are the steps:

  1. Unscrew the cap.
  2. Remove the separate steel cutting cap from the jar and set it aside.
  3. Find the inside (center) end of the floss on the spool and pull out a few inches.

     ⚠️ Do not use the outer end of the floss — it must feed from the center.


  4. Drop the floss spool into the container with the inside center-pulled end hanging out the top.
  5. Reattach the metal cutting cap, threading the floss through the  through the small side slit (it is slightly rounded).

    | Do not use the opening underneath the cutter — that’s not meant for threading.
    Thread floss through the more rounded opening in cutter top
  6. Pull out a length of floss and cut using the cutter. You're ready to floss!

_________________________________________________________________________________

Important Notes

  • DO NOT feed the floss from the outside of the spool through the cutting cap. This will cause jams and prevent smooth dispensing.

  • There are two ends to a floss spool:

    • The outside end wraps around the outside of the roll and must remain tucked at the bottom.

    • The inside (center) end feeds from the middle — this is the end you want to pull through the cap.